Hallo,
Dit is zelf te doen, heb het vorig jaar ook gedaan na aankoop boot:
1). Press "PTT" and "CH16" key and hold, turn on the S15 .
2). To enter the system setup mode. Input password "198008" and press enter.
3). To change the MMSI use < or > key on fist mike to select 'MMSI SET' then
press enter. Use the numeric keypad to enter new MMSI then press enter.
4). In the system setup mode, use < or > key to select "CHANNEL SECTION"
form menu and press "ENT" to accept.
5). In this case, use < or > key to select a International UK, USA or
Canadian channel set and press "ENT" to accept.
6). M1 & M2 channels are included in the 'K' (UK) channel set.
7). To Clear the memory use < or > to select 'clear memory' press ENTER key.
The unit will then ask you to confirm. For YES press ENTER for NO press CLEAR.
8). To add private channels (some early models do not have this facility)
use < or > key to select 'PRIVATE CHANNELS' press 'ENTER'. Enter private
channel (00 - 159) on P0 then press 'ENTER'.
Use up arrow to select channel P1 then enter 2nd private channel (if
required) then press 'ENTER' again. Return to menu and select EXIT as
described in (9) below.
9). Select "EXIT" in the menu and press "ENT" to exit system setup mode and
restart the S15 device
Succes!
