Ik neem aan dat je dit al hebt uitgevoerd, als het zo niet wil wordt het tijd om contact op te nemen met de leverancier / producent.
Porthand mounting
Although the Tillerpilot is factory preset for starboard-side
mounting, it is possible to reconfigure it for mounting on the port-side of the cockpit to facilitate easy installation on most types of yacht.
Starboard and Port mounting options
With the power off, hold down the
NAV and TACK keys and switch on the power. The port or starboard LED will illuminate, depending on the current mounting configuration.
Press the port key to select port-side mounting – the port LED will illuminate to indicate selection.
Confirm selection and exit to Standby mode by pressing
NAV.
To select starboard mounting, repeat the above procedure, but
press the starboard key.